FREE SHIPPING on rustic fans and windmill heads!

Top Menu



The complete windmills, measured from the top of the fan to the bottom of the stand, are approximately 8, 11, 15, and 20 feet tall.

These are approximate dimensions:

Windmill Head — Fan Diameter
8 — 30 inches
11 — 40 inches
15 — 47 inches
20 — 60 inches

Rustic Fan — Fan Diameter
8 — 30 inches
11 — 38 inches
15 — 47 inches
20 — 60 inches

Windmill — Footprint
8 — 32 x 32 inches
11 — 44 x 44 inches
15 — 50 x 50 inches
20 — 62 x 62 inches


We build our 8, 11, 15, and 20 windmill stands and water towers with treated yellow pine.  Our windmill heads have been used on cedar stands, painted wood stands, and metal stands, just to name a few.

The wagons are also built with treated yellow pine.

The fan blades, wire ring, and rudder are made from galvanized steel.  All other head components are made from steel and painted black.

The 8, 11, and 15 windmill heads use a durable hub with sealed bearings that do not need greasing.

The 20 windmill head uses a heavy duty hub/bearing assembly, and is greased through the spindle and packs both the front and rear bearings simultaneously.  The dust cap has a rubber plug that can be easily removed to repack the bearings, we recommend once a year.  The same hub/bearing assembly is used at the pivot point where the vertical and horizontal shafts meet.

The windmill heads do not have a brake, but the 20 windmill head has a break in the horizontal shaft allowing it to be rotated 90 degrees parallel to the ground.  This causes the rudder to prevent the fan from facing directly into the wind.

The fan blades have red vinyl tips.  The rudder can be plain (galvanized steel), or can have a vinyl state flag of Texas for no additional charge.

No.  If you would like a custom rudder, we recommend purchasing the head with the plain (galvanized steel) rudder, and then taking the rudder to a local paint or vinyl shop for customization.

For windmill heads that are shipped, assembly is required.  No additional welding or drilling on any of the head components is required.  The tools required for the head assembly are a Phillips screwdriver and pliers.  For the 20 windmill head, a rubber mallet and grease gun are also required.

The cheap garden windmills cannot be compared to our high quality windmills.  Our windmills are made of heavy duty components and are built to last in an outdoor environment.

Yes, the fan turns and the head pivots when the wind blows.

These windmills are decorative only, and are not designed to pump anything.  Any modifications to the originally manufactured head components will void the one-year warranty.


No, but as an alternative you may qualify for PayPal Credit.  For more info, click here:  PayPal Credit

These are the fees for setting up complete windmills at the time of delivery:

Windmill — Set Up Fee
8 — $10
11 — $15
15 — $30
20 — service not offered

These are the fees for setting up water towers at the time of delivery:

Water Tower — Set Up Fee
8 — $10
11 — $15
15 — $20
20 — $25

Set Up includes erecting one windmill or water tower on stable ground having ample space, driving rebar through each leg into soil for anchoring purposes, and assembling and installing the head components.  For other conditions and services, the set up fee will be adjusted and must be approved before the set up takes place.

We collect 8.25% sales tax for products that are delivered or shipped to a Texas address.  We will waive collection of this sales tax if you provide us with one of the following completed and signed certificates:

  • Texas Sales and Use Tax Resale Certificate
  • Texas Sales and Use Tax Exemption Certification

For wholesale pricing information, please submit the following information:

Your Business


Your Information



  • Visa, MasterCard, Discover, American Express, Diners Club, JCB
  • PayPal
  • Checks (must clear before we ship)
  • Cash (at pick up or delivery, but not through the mail)

Shipping / Delivery

The 15 and 20 complete windmills can only be delivered due to their size.  All of our other products can be either delivered or shipped.

The delivery charge is $2.00 per mile one way from the factory in Ross, Texas.  This rate is the same for a single purchase or multiple purchases, as long as the entire order fits on one trailer and is delivered to a single location.

You can request a quote by calling us at 1-800-693-9361 or by submitting the following information:



Your Information



The price of the rustic fans and windmill heads includes FREE SHIPPING within the contiguous United States (excluding the 60″ Windmill Head and the 60″ Rustic Windmill Fan – Whole).  For all of our other products, or if shipping outside of the contiguous United States, you can request a quote by calling us at 1-800-693-9361 or by submitting the following information:



Your Information



Alabama – Arizona – Arkansas – California – Colorado – Connecticut – Delaware – District of Columbia – Florida – Georgia – Idaho – Illinois – Indiana – Iowa – Kansas – Kentucky – Louisiana – Maine – Maryland – Massachusetts – Michigan – Minnesota – Mississippi – Missouri – Montana – Nebraska – Nevada – New Hampshire – New Jersey – New Mexico – New York – North Carolina – North Dakota – Ohio – Oklahoma – Oregon – Pennsylvania – Rhode Island – South Carolina – South Dakota – Tennessee – Texas – Utah – Vermont – Virginia – Washington – West Virginia – Wisconsin – Wyoming

Yes.  You can request a quote by calling us at 1-800-693-9361 or by submitting the following information:



Your Information



  • UPS
  • DB Schenker
  • Various freight companies

All products can be picked up at the factory in Ross, Texas for no additional charge.  Please allow at least two business days prior to pick up to allow the order to be fulfilled.


Yes, click here:  Brochure

The windmill heads come with a one-year warranty, which provides replacement parts for failure and breakage caused by:

  1. manufacturing defects
  2. parts wearing out

The warranty does not cover against damage caused otherwise, including but not limited to:

  1. acts of nature
  2. the windmill falling over
  3. improper assembly
  4. improper placement

Any modifications to the originally manufactured head components will void the one-year warranty.

You have up to 15 days after receiving the shipped/delivered items to initiate a return.  All returned items are subject to a 20% restocking fee, which will be waived if a similar replacement product is purchased.  Neither the original shipping/delivery fee nor any set up fee is refundable.  The customer is responsible for all costs associated with returning the items.

These are the original shipping fees, which also apply to items having Free Shipping, that will not be refunded:

Windmill Heads
8 — $25
11 — $40
15 — $60
20 — $165

Rustic Fans (Whole)
8 — $30
11 — $45
15 — $50
20 — $125

Rustic Fans (Half)
8 — $20
11 — $30
15 — $35
20 — $50

To qualify for a refund, all items must be returned in their original condition using the original packaging.  After receiving and inspecting the returned items, we will refund the purchase price of the item less:

  1. the original shipping fee
  2. the restocking fee (waived if a similar replacement product is purchased)
  3. the cost of replacing or repairing any damaged items found during the inspection.

To initiate a return, please call us at 1-800-693-9361 or submit the following information:

Return Information


Your Information



  1. Keep the original box and packaging material, as they are required during the claim process.
  2. Call us at 1-800-693-9361 or submit the information using the form below and provide details about the damage.
  3. We will contact the shipping company and file a claim.
  4. The shipping company will contact you to set up a damage inspection.
  5. After the inspection, repackage the damaged part inside the box in which it was originally shipped.
  6. The shipping company will pick up the repackaged damaged part at your location and return it to us.
  7. Once we receive the damaged part, we will ship a new part to you.

Note:  If the shipping company denies the claim, you will be responsible for all costs related to the replacement part and shipping.

Damage Information


Your Information



Yes, the windmill head includes easy to follow step-by-step instructions for building the wood stand yourself.  Included in these instructions are tool requirements, lumber requirements, and templates which can be used to make sure the angles are cut properly.

We recommend driving rebar through holes drilled in each leg at a diagonal near the base of the stand.  Additionally, you can drive an auger into the ground below the center of the stand, and connect a steel cable to the auger and to the top of the stand, placing a turn buckle in the middle so that the cable can be tightened.

Please call us at 1-800-693-9361 or submit your request below:

Your Message


Your Information